Two meter photographs can support a flow calculation only if they show the same verified meter, readable units and a controlled interval. A phone timestamp alone does not record whether a toilet filled or another property used water. The surrounding test note supplies that missing context.
Frame identity as well as digits
Take an orientation image of the chamber and a close image showing serial, display and low-flow indicator. Compare the serial with a bill or supplier record. If several meters appear, label positions consistently. Do not photograph unnecessary account details.
Use the camera’s original file and record clock source if timing precision matters. Avoid filters or edits that obscure digits. An annotated copy may highlight the display, but retain the source image and mark the copy as annotated.
Document the observation interval
Record exact start and finish times, units and confirmation from all known users that outlets and appliances remained off. Note shared branches, occupancy and any interruption. Do not lengthen the test where lack of water could create a safety or welfare problem.
If a reading is ambiguous, say so rather than rounding it to support a conclusion. A short interval may justify a longer professional logger test, but converting it into a daily volume requires a stable rate and explained method.
Use photographs as one evidence strand
A change supports flow on the measured boundary; it does not prove location or ownership. Check visible toilets, appliances and overflows safely, then investigate private buried or concealed routes proportionately. A static interval does not exclude intermittent loss.
After repair, repeat under comparable conditions and link the images to the repair verification. Keep filenames, times and calculations in an index. This lets the homeowner, supplier or later investigator audit the observation without mistaking a pair of photographs for a complete leak diagnosis. If daylight, condensation or chamber water makes digits hard to read, record that limitation and take another image without reaching into an unsafe space. Keep both photographs when the second clarifies the first. Any manual calculation should show starting value, finishing value, units and elapsed time. A reviewer should not need to infer whether a red dial, decimal place or cubic-metre display was used. Preserve the original metadata and record any corrected transcription. Keep the correction author and date.
Further reading
Prepared with AI assistance using the sources listed above. General information cannot diagnose an individual property. Contact us to discuss your circumstances.
Would you like to talk it through?
Tell us what you have noticed and request a callback for further information.
Speak to a specialist