Home / Blog / Dorking

Dorking · Leak detection guidance

Leak detection in Dorking: what belongs in a water-supplier notice pack?

Exact Source · 2 November 2026 · 2 min read

Locating a supply leak does not automatically authorise repair work. Some plumbing proposals must be notified to the water supplier before work starts, unless an applicable approved-contractor route is used. A notice pack should make the proposed work understandable without overstating the leak investigation.

Separate the finding from the proposal

Include the property and account identifiers, meter serial, a sketch of the suspected or exposed private pipe, test conditions and the evidence locating the defect. Mark water-company apparatus and any shared arrangement separately. A leak zone is not a confirmed pipe route until access provides that evidence.

Describe the proposed repair or replacement: material, size, route, connection, depth or protection where relevant, and the person responsible for design. The leak report can support this proposal but should not substitute for the competent installer’s specification.

Record the notification decision

WaterSafe explains that certain work under the Water Supply (Water Fittings) Regulations must be notified in advance and that approved contractors may follow a different route for specified work. Ask the installer or supplier which category applies. Keep the submitted form, drawings, date and acknowledgement or consent.

Do not begin notifiable permanent work merely because water is being lost. Emergency make-safe action can be documented separately, including its temporary status. If the route changes after excavation, check whether the accepted notification still covers it and record the answer.

Close the pack after repair

Add photographs of the exposed defect and installed repair, product information, test boundary and return-to-service result. Reconcile the actual route with the plan and record any supplier inspection. Keep certificates and the final invoice with the notice reference.

If responsibility for a pipe section remains uncertain, preserve the technical evidence and seek the supplier’s or appropriate professional’s view rather than assigning ownership in the leak report. The completed pack then shows a lawful decision path from detection to work, while leaving account and liability questions to the proper process. Add a contents page showing each drawing, acknowledgement, photograph and certificate, with its date and author. If the supplier asks for clarification, keep the question and response beside the submitted version. Record any condition attached to consent and who confirmed it was satisfied. This avoids treating approval as a generic permission for later work outside the described route. Keep the final reference visible.

Further reading

Prepared with AI assistance using the sources listed above. General information cannot diagnose an individual property. Contact us to discuss your circumstances.

Would you like to talk it through?

Tell us what you have noticed and request a callback for further information.

Speak to a specialist