Home / Blog / Esher

Esher · Leak detection guidance

Leak detection in Esher: when does a humidity log help the investigation?

Exact Source · 5 November 2026 · 2 min read

Humidity data can help explain a surface moisture pattern, but it cannot identify a leaking pipe by itself. Leak detection in Esher should use the log to test a specific condensation or drying proposition and compare it with defined plumbing, weather and occupancy evidence.

Define the question before logging

State whether the concern is condensation on a cold surface, drying after a known event or an unexplained patch. Choose monitor positions that compare the affected area with a suitable reference. Record sensor identity, height and nearby heat or moisture sources.

Do not collect weeks of data without an intended decision. The plan should say what pattern would support condensation, what would remain consistent with a leak and when another professional assessment is needed.

Capture relevant conditions

Log humidity and temperature at an interval suited to occupancy events, and note heating, ventilation, cooking, bathing and weather that actually occurred. Keep clocks aligned. A daily average can hide short peaks.

Record changes to window use, extract fans, furniture or decoration. Do not ask occupants to live unsafely or uncomfortably merely to create a test condition.

Compare with plumbing evidence

Place the humidity trend beside pressure, meter, appliance or controlled-use results. A patch that changes with humidity may support an environmental mechanism; persistent local wetting can keep plumbing or building-envelope alternatives open.

Surface moisture instruments have material limitations. Use fixed points and scales, and do not present a relative reading as universal percentage water content.

End with a decision

Set a review date and state whether the expected conditions occurred. If data supports condensation, refer ventilation or building questions appropriately without calling that a pipe repair. If evidence conflicts, preserve it and refine the next test.

A concise log can prevent unnecessary opening while ensuring ‘condensation’ is not used as a convenient label. The report should remain clear about which water systems were actually tested. Include sensor position photographs, clock checks and a table of events that actually occurred. At review, state whether the planned humidity range and occupancy conditions were represented. If not, extend only for a defined reason or refer the unresolved question; do not claim the absence of a leak from an untested environmental period.

Further reading

Prepared with AI assistance using the sources listed above. General information cannot diagnose an individual property. Contact us to discuss your circumstances.

Would you like to talk it through?

Tell us what you have noticed and request a callback for further information.

Speak to a specialist