Home / Blog / Farnborough

Farnborough · Leak detection guidance

Leak detection in Farnborough: what should a callback triage questionnaire ask?

Exact Source · 5 November 2026 · 2 min read

A caller may report that ‘the leak is back’ when they see a stain, pressure change or new water elsewhere. Leak detection in Farnborough should use a short triage questionnaire to identify safety, compare the original boundary and choose the right response without asking the occupant to conduct risky tests.

Start with urgent safety

Ask whether water is active, controllable, near electrics or affecting unsafe building fabric. Give appropriate emergency advice and keep people away. Do not delay make-safe action for a complete questionnaire.

Record the caller, property, time and immediate action. Do not ask them to touch wet fittings, operate unfamiliar valves or reproduce damage.

Identify the new symptom

Ask exact location, appearance, start time, duration and related normal use. Request safe orientation photographs. Distinguish a new stain from growth of an existing mark and direct observation from assumption.

Record heating, appliance, weather or meter conditions only where actually known. Avoid leading questions that make the new event fit the old diagnosis.

Compare the repair boundary

Use the original system, pipe section, test and monitoring instructions. Ask whether the symptom occurs under the same condition and whether any other work altered the system. Residual moisture or another defect may resemble recurrence.

Do not decide warranty or liability during triage. Classify immediate attendance, prompt review or monitoring based on safety and evidence.

Close the callback record

Link attendance findings to the original report without overwriting it. State whether the repair, a new defect or no active source was found, plus verification and next trigger.

A focused questionnaire helps the right professional arrive prepared while preventing the customer from becoming the tester. Keep the closure message and acknowledgement with the repair history. Give every callback a priority, owner and response target, then record actual attendance and outcome. If the customer cannot describe the system, use orientation photographs and the original drawing rather than leading them toward a diagnosis. Any advice to isolate water should identify the verified control or direct them to emergency help, never assume they can safely find an unfamiliar valve. Record whether the new symptom sits inside, adjacent to or outside the original repair boundary before discussing scope or responsibility.

Further reading

Prepared with AI assistance using the sources listed above. General information cannot diagnose an individual property. Contact us to discuss your circumstances.

Would you like to talk it through?

Tell us what you have noticed and request a callback for further information.

Speak to a specialist