Home / Blog / Hook

Hook · Leak detection guidance

Leak detection in Hook: what should a condensation-versus-leak check record?

Exact Source · 2 November 2026 · 2 min read

Condensation and leakage can coexist, and neither should be chosen merely because the other is difficult to confirm. A useful check records material, pattern, room conditions and plumbing propositions over time, then explains what evidence would change the decision.

Map the surface pattern

Photograph fixed points and record moisture or temperature readings with instrument scale, material and comparison area. Note cold bridges, glazing, corners and visible service routes. Do not describe a relative meter value as a percentage water content unless the method supports it.

Record occupancy, heating, ventilation, cooking, bathing and weather events that actually occurred. Include dry comparison periods. Avoid instructing unsafe or unreasonable changes simply to produce evidence.

Test the relevant water systems

Define supply, heating, waste, appliance or exterior propositions and use competent controlled checks. A negative result applies only to the boundary and time tested. An intermittent leak may remain possible.

Moisture movement after ventilation can support condensation but may also occur while old water dries. Keep repair, drying and environmental advice separate and involve the appropriate building professional where needed.

Write the review plan

Set labelled monitoring positions, interval, observer and date. State evidence for and against each explanation and any inaccessible area. Give urgent triggers for active water, electrics or unsafe fabric.

At review, compare the actual conditions with the plan. If the predicted response did not occur, revise the leading proposition instead of defending the original label. This gives a homeowner who cannot find a leak a practical route without unnecessary access or casual dismissal. Include a table of monitoring points, material, reading method and any point lost to decoration or furniture. Record ventilation or heating changes with dates so a trend is not attributed to weather alone. If plumbing tests and environmental evidence remain balanced, say so and identify the specialist question for the next visit. Do not keep monitoring indefinitely: set an end condition and a decision when evidence remains inconclusive. Preserve the raw readings and note who took them, not only the plotted trend. Compare the end state with the original photographs and record any new surface change or intervention.

Further reading

Prepared with AI assistance using the sources listed above. General information cannot diagnose an individual property. Contact us to discuss your circumstances.

Would you like to talk it through?

Tell us what you have noticed and request a callback for further information.

Speak to a specialist