Home / Blog / Sandhurst

Sandhurst · Leak detection guidance

Leak detection in Sandhurst: why should evidence clocks be synchronised?

Exact Source · 5 November 2026 · 2 min read

Intermittent leak evidence often comes from several clocks: a phone, camera, pressure logger, meter logger, heating controller and occupant notes. For leak detection in Sandhurst, small time differences can change whether a reading appears to follow an appliance cycle, rainfall or an isolation. The report should record and correct clock offsets transparently.

Choose one reference time

At the start of monitoring, compare each device with a stated reference and record the difference. Do not silently reset source files. If a logger is five minutes slow, preserve its original time and show the correction applied in the working timeline.

Record timezone and daylight-saving context where a period crosses a clock change. A timestamp without that information may duplicate or omit an hour. The practical aim is to compare events, not to claim precision beyond the device.

Link events to their source

Every entry should identify whether it came from automatic data, a photograph, controller record or a person’s account. An occupant may estimate when a stain appeared; that estimate should not be presented with the same precision as a logger sample.

Keep original files and metadata where relevant. Annotated copies can display corrected time, but must be labelled. Do not alter an image or export in a way that obscures the source timestamp and adjustment history.

Test the timeline for contradictions

Check whether the supposed cause occurred before the symptom and whether the sampling interval could miss a short event. A ten-minute logger cannot show the exact second a valve changed. Heating run-on, delayed water travel and sensor response also need explanation.

Retain events that do not fit the preferred theory. A shower cycle without a leak or a pressure change without visible water may narrow the next test. The timeline should help design a safe comparison, not simply illustrate a conclusion already chosen.

Close the clock record

When equipment is removed, compare its clock with the reference again and note drift. State any missing period, battery change or manual entry. Keep the correction table with exported data and the report version.

After repair, use the same reference for verification and recurrence monitoring. A synchronised record lets a later professional distinguish a genuine sequence from a clock mismatch and makes the written decision more defensible without overstating measurement accuracy.

Further reading

Prepared with AI assistance using the sources listed above. General information cannot diagnose an individual property. Contact us to discuss your circumstances.

Would you like to talk it through?

Tell us what you have noticed and request a callback for further information.

Speak to a specialist