Home / Blog / Sandhurst

Sandhurst · Leak detection guidance

Leak detection in Sandhurst: how should inaccessible areas be recorded?

Exact Source · 2 November 2026 · 2 min read

When part of a property cannot be inspected, the omission should be visible in the leak detection record rather than buried in a general disclaimer. An inaccessible-area register shows what was unavailable, why it mattered and what would allow a later check. It protects the quality of the decision without pretending that every closed void contains a leak.

Name the place and the reason

Record each excluded space precisely: for example, the rear section of a boxed service run, not simply ‘some areas inaccessible’. Add the access point, the apparent system nearby and the reason entry was not possible. Common reasons include missing authority, stored belongings, fixed finishes, unsafe conditions or a locked neighbouring room. Photograph the wider position without exposing private material unnecessarily.

Distinguish physical inaccessibility from a choice not to test. A ceiling void may be reachable but outside the agreed scope; a cupboard may be within scope but blocked on the day. That difference affects the next instruction. It also stops a future reader assuming that silence in the report means the area was examined and found dry.

Explain the consequence for the conclusion

Link each omission to the question it limits. If an unviewed branch could sit within the tested boundary, say whether readings elsewhere reduce or leave open that possibility. Avoid declaring the whole property leak-free after testing only one isolated circuit. A negative result supports only the system, operating condition and time actually examined.

Propose a proportionate route back: occupant preparation, consent from another owner, safe removal by the appropriate trade or monitoring under defined conditions. State who must arrange it and what observation would justify returning. Do not recommend destructive access merely to eliminate every theoretical uncertainty.

Keep the register alive

Issue the register with the report and mark entries closed only when the area is inspected or the technical question is resolved another way. Preserve the original wording and add a dated outcome. HSE planning guidance emphasises using available site information and addressing foreseeable risks before construction activity; an access limitation should therefore inform any later opening plan.

For someone searching for leak detection near me because they cannot find a leak, this record provides a disciplined next step. It does not diagnose an unseen defect. It makes the remaining uncertainty reviewable and prevents a new investigator from repeating work or relying on an assumption that was never tested.

Further reading

Prepared with AI assistance using the sources listed above. General information cannot diagnose an individual property. Contact us to discuss your circumstances.

Would you like to talk it through?

Tell us what you have noticed and request a callback for further information.

Speak to a specialist