Home / Blog / Teddington

Teddington · Leak detection guidance

Leak detection in Teddington: how should a post-repair meter baseline be recorded?

Exact Source · 2 November 2026 · 2 min read

A repaired supply leak should be checked technically, and the meter can provide a useful whole-boundary comparison. The post-repair baseline must use verified meter identity and controlled conditions. It is a reference for later review, not a guarantee of a particular bill.

Recreate the relevant test

Use the same meter, units and no-use definition as the pre-repair observation where possible. Photograph serial and display at start and finish, with times. Confirm all known users and appliances remained off and note any interruption.

If the earlier test lacked control, do not pretend the readings are directly comparable. Establish a new documented baseline and explain the limitation. Shared supplies may need coordination or supplier help.

Add repair-specific verification

Record the repaired pipe, location, material, method and local test before backfilling or closure. A stable whole meter supports the result but does not replace inspection of the actual repair. If flow continues, check legitimate use and test boundaries before assuming a second leak.

Observe representative normal use only through safe operation and note the period. Do not manufacture a daily consumption prediction from a short sample; occupancy and appliances vary.

Keep the baseline useful

Store the photographs, readings, calculation and repair note together. Give the owner the date, conditions and meter identifier so a later reading can be compared honestly. Record any closed external branch or temporary restriction.

If the supplier requests proof for an adjustment, share the factual pack and let it decide under its process. Set a review trigger for unexpected movement or renewed symptoms. The baseline then supports decisions without turning one quiet interval into an all-property, permanent leak-free claim. Record the first ordinary bill or scheduled reading after repair separately from the technical baseline. Weather, occupancy and appliance changes may make consumption differ without indicating repair failure. If a later check is needed, repeat the original no-use conditions and explain any new branch or meter change. Keep the person who took each reading and the source file for every photograph. Note the exact repair completion time and any flushing period excluded from comparison. Add a dated closure entry when the review is complete, plus any unresolved use anomaly and its owner. State the next reading date, responsible person, review recipient, comparison method and reporting route.

Further reading

Prepared with AI assistance using the sources listed above. General information cannot diagnose an individual property. Contact us to discuss your circumstances.

Would you like to talk it through?

Tell us what you have noticed and request a callback for further information.

Speak to a specialist