Home / Blog / Teddington

Teddington · Leak detection guidance

Leak detection in Teddington: can a vacancy reading be compared with occupied use?

Exact Source · 5 November 2026 · 2 min read

A vacant property may offer a useful no-use interval, but its meter pattern cannot be compared directly with occupied consumption without context. Leak detection in Teddington should use vacancy to test unexplained flow while keeping normal use, automatic equipment and repair verification distinct.

Confirm what vacancy means

Record dates, keyholder, meter identity and whether toilets, heating fill, irrigation, appliances or contractors still use water. A property with no resident may not be a no-use boundary.

Do not disable safety or building systems merely to achieve zero flow. Name automatic equipment and any shared supply that remains active.

Capture a controlled vacancy interval

Photograph start and finish readings, units, serial and times. Record every entry and known water event. A logger can reveal patterns, but its clock and installation need verification.

If the meter moves, investigate legitimate use and boundary before calling it leakage. If static, the result applies only to the interval and conditions.

Compare occupied periods carefully

Use similar days or operating schedules and separate total consumption from no-use evidence. Occupancy, visitors and appliance cycles make averages variable. Do not extrapolate a short vacancy rate into a precise annual loss.

After repair, repeat the no-use test where possible and record any new equipment or branch change. Keep the first ordinary bill separate from the technical baseline.

Close with a clear interpretation

State whether vacancy evidence supports continuous loss, intermittent use or no unexplained flow during the period. Identify missing events and shared users. Leave account adjustments to the supplier.

A careful baseline helps the owner decide on further leak detection without treating ordinary occupied use as repair failure or a quiet vacant interval as a permanent guarantee. Add a vacancy log with every property entry, contractor visit, heating or irrigation event and known automatic refill. If a keyholder cannot confirm a period, mark it uncontrolled. When occupancy resumes, start a new comparison period and record the change. Any supplier pack should show the two conditions separately so a reviewer does not subtract an unoccupied reading from normal use and call the whole difference leakage. Record the meter serial and units on every comparison so a meter exchange cannot be mistaken for a sudden technical change.

Further reading

Prepared with AI assistance using the sources listed above. General information cannot diagnose an individual property. Contact us to discuss your circumstances.

Would you like to talk it through?

Tell us what you have noticed and request a callback for further information.

Speak to a specialist