Home / Blog / Putney

Putney · Leak detection guidance

Leak detection in Putney: when should a boundary map be revised after excavation?

Exact Source · 5 November 2026 · 2 min read

Excavation may reveal that a pipe crosses a visible fence, drive or assumed boundary differently from the pre-work sketch. Leak detection in Putney should update the technical route and fixed measurements while keeping legal boundary interpretation separate and preserving the original evidence used to authorise access.

Preserve the pre-excavation map

Keep the original route, boundary source, meter, valve, search zone and assumptions under its issue date. A prediction that proves wrong is still part of the decision history. Do not replace it with a drawing that makes the exposed route look known all along.

Identify whether the boundary came from supplied plans, management information or visible features. A fence line should not be presented as the legal boundary without the appropriate basis.

Measure the confirmed route

Record pipe position, depth, material and defect from at least two stable references. Photograph the pipe in context before repair and backfill. Note services and construction found.

Do not extend the confirmed line beyond the exposed section. Buried route on either side may remain inferred. Water in ground can travel, so connect the defect through direct evidence and testing.

Address permission changes

If the pipe or work crosses outside the authorised area, stop and obtain new land access or management approval. Protect the excavation safely. A technical finding does not grant rights over another area.

Update the repair quotation and reinstatement condition for the new zone. Keep ownership, easement and cost allocation for the relevant documents and advisers.

Issue a revision with clear status

Show original assumptions, confirmed segment and remaining inference using a legend. Record who supplied or approved any boundary correction. Give affected parties the relevant technical extract without unnecessary account data.

The final map should link repair verification and surface reinstatement. This supports future maintenance and land decisions without letting a short excavation settle questions the evidence did not answer. Add a revision note identifying every changed coordinate, boundary source and confirmed pipe segment. Give the land controller and owner the relevant version and record delivery. If a reinstatement contractor uses the drawing, they should acknowledge the exposed route before backfill. Preserve any surveyed or legal boundary information separately so the technical map cannot be mistaken for a title determination.

Further reading

Prepared with AI assistance using the sources listed above. General information cannot diagnose an individual property. Contact us to discuss your circumstances.

Would you like to talk it through?

Tell us what you have noticed and request a callback for further information.

Speak to a specialist